$335.00 – $718.00
NRC Range: 0.85 – 1
Tile size: 24″ x 48″
SONEX One noise reduction panels are versatile and provide effective acoustic control in a variety of applications and environments including industrial facilities, multipurpose rooms and architectural projects.
SONEX One noise reduction panels are attractive and reliable, featuring Noise Reduction Coefficient (NRC) ranging from 0.85 to 1.10. The sculpted surface of each panel deflects and disperses sound waves, allowing the open-cell willtec® foam to convert sound energy into quiet, kinetic energy.
SONEX One panels are available in natural, colortec™ and water-based HPCcoated finishes. Our exclusive HPC formulation protects the foam from dust and dirt and makes it possible to wipe panels clean using only a damp cloth. Panels are also available in colortec (the entire thickness of the foam is dyed a deep charcoal).
These panels are especially appropriate for high-traffic areas. SONEX One panels are easy to install on any wall and/or ceiling surface with SONEX’s acouSTIC water-based adhesive. The panels can also be used in conjunction with SONEX One baffles, which have the same pattern but are designed to hang from ceilings in large rooms or open interior spaces.
Size
Applications
Material
acouSTIC adhesive (part number PA-02) has been specially formulated to use with all SONEX®, WILLTEC®, CONTOUR®, WHISPERWAVE panel products, PROSPEC® Foams and Composites. This nontoxic, practically odorless, water-based adhesive makes direct-apply, glue-up installation work quick and easy. acouSTIC adhesive provides an immediate tack between panels and most substrates making for strong, permanent bonds. Other adhesives may not be compatible and may emit an odor.
Features
Nontoxic, water-based adhesive.
Easy cleanup with soap and water.
Compatible with both polyurethane and WILLTEC foams.
Each 10.3-ounce (304.61 ml) tube installs between 16 and 24 square feet (1.49 and 2.23 square meters) panel coverage.
Tube fits standard caulking guns.
General Installation Notes
Handle with care. Do not pick up or handle panels by the corners.
Store panel boxes flat in clean, dry areas protected from the elements; excessive heat, cold and humidity.
Do not set or stack anything on top of cartons.
Work panels with clean hands, tools, ladders, etc. on clean work surfaces. Wear clean, soft white cotton gloves to handle panel installation, recommended.
Super sharp, stainless steel smooth long-blade insulation knives are ideal for making straight cuts, slicing through thick WILLTEC and SONEX panels. Shorter-length utility and extendable snap-off blade knives are best suited for making smaller detail cuts.
For best results, cut panels through ‘exposed-to-view’ panel faces.
Make certain that substrate surfaces to which panels will be applied are smooth, clean and level; free of dust, dirt and other residues or contaminants which could inhibit a strong bond to develop.
Cut adhesive tube tips back to produce a bead flow of 1/4 inch (6.4 mm) diameter.
Run a continuous bead of adhesive around the panel’s perimeter, approximately 1.5 inch (38 mm) from edges, then apply intermittent beads from opposite corners through the center of the panel creating an X.
Press panels firmly into place and smooth evenly across them to ensure a strong, lasting bond; adhesive tack should be immediate.
General tolerances & dimensions stability
Thickness:
– Up to 2” – tolerances of +/- 2 MM = +/- 0.08”
– Above 2” – tolerances of +/- 3 MM = +/-1/8”
Length & width:
– Up to 24” tolerance of +/- 3 MM = 1/8”
– Up to 96” tolerance of +/- 6 MM = 1/4”
Sonex convolution (sonex one / valueline / classic / mini / junior):
– Pattern alignment to edge: +/-1”
Due to the nature of willtec material, temperature and humidity may cause dimensional changes of up to 4% by volume.
white
grey
arctic white
medium grey
light grey
black
black*
*Color is impregnated in the foam and has a water-based acoustic coating on top.
Vermillion
Orange Red
Frost
Superior
Olive
Sweet Corn
Brown Black
Dark Grey
brown
charcoal
The Sonex® Acoustic Panel Adhesive has been specially formulated for use with our Sonex® acoustic foam panels.