WHISPERWAVE Ribbon Wall Panel

Features

• Nontoxic, water-based adhesive.
• Easy cleanup with soap and water.
• Compatible with both polyurethane and WILLTEC foams.
• Each 10.3-ounce (304.61 ml) tube installs between 16 and 24 square feet (1.49 and 2.23 square meters) panel coverage.
• Tube fits standard caulking guns.

General Installation Notes

• Handle with care. Do not pick up or handle panels by the corners.
• Store panel boxes flat in clean, dry areas protected from the elements; excessive heat, cold and humidity.
• Do not set or stack anything on top of cartons.
• Work panels with clean hands, tools, ladders, etc. on clean work surfaces. Wear clean, soft white cotton gloves to handle panel installation, recommended.
• Super sharp, stainless steel smooth long-blade insulation knives are ideal for making straight cuts, slicing through thick WILLTEC and SONEX panels. Shorter-length utility and extendable snap-off blade knives are best suited for making smaller detail cuts.
• For best results, cut panels through ‘exposed-to-view’ panel faces.

Installation with acouSTIC

• Make certain that substrate surfaces to which panels will be applied are smooth, clean and level; free of dust, dirt and other residues or contaminants which could inhibit a strong bond to develop.
• Cut adhesive tube tips back to produce a bead flow of 1/4 inch (6.4 mm) diameter.
• Gently slide the panel into position side to side and up and down. Press onto the substrate. Hold the panel in position for 5 seconds. If necessary, remove panels from the surface for about one minute to allow the adhesive to become tacky with exposure to the air. Then press the panel back into position.