Baffle corkscrews: The corkscrew hangers are hardware for installing acoustical melamine foam clouds and baffles for ceiling-mounted cable installation. We also offer cable kits.
Important Pricing Update: Due to recently implemented tariffs, SONEX Online will be adjusting prices by 3% to help offset increased raw material costs. We’ve already taken significant steps to minimize the impact on our customers. If tariffs are reduced or new ones introduced in the future, we will promptly adjust our pricing accordingly.
Weight | N/A |
---|---|
Dimensions | N/A |
WHISPERWAVE Ceiling Cloud
Each box of 4 clouds requires 16 corkscrew hangers
WHISPERWAVE Ribbon Sound Baffle
Each box of 8 baffles requires 16 corkscrew hangers
WHISPERWAVE Sound Baffle
Each Box of 4 baffles requires 8 corkscrew hangers
SONEX Valueline Hanging Baffle
Each box of 6 baffles requires 12 corkscrew hangers
SONEX Rondo Sound Baffle
Each box of 16 baffles requires 16 – 32 corkscrew hangers
16 for vertical mounting
32 for horizontal mounting
• Corkscrew hangers are installed in the field for ceiling-mounted cable installation of foam baffles and clouds (cable and cable mounts provided by installer).
• Center corkscrew hangers over marked mounting location.
• While holding it vertically, press down and lightly turn the hanger.
• Allow the pressure to pierce the foam. Do no poke the hanger into the foam.
• Turn corkscrew clockwise until it the top coil is touching the edge of the baffle.
Note: Turn they eye loop so it is parallel to the top of the baffle and the opening of the eye loops face in the same direction.
• Avoid hanging baffles or clouds more than 10 feet below the ceiling. Long tethering will cause them to sway in air currents.
• Installation is best done at the end of the construction project.
• Use clean gloves to prevent soiling material.
• Melamine foam is fragile, please handle with care.
• Do not install material of unacceptable quality.