acouSTIC Adhesive

$11.00$13.00

The SONEX® Acoustic Panel Adhesive has been specially formulated for use with our Sonex acoustic foam panels.

  • Starting from: $8.50
COLORS: Colors do not necessarily reflect the actual color of the product.
SHIPPING TIME: Natural Finishes typically ship same day to 10 days, Standard Painted finishes typically 10 to 15 days and Premium Colors 15+ days.
SHIPPING RESTRICTION: Due to Proposition 65 and local building codes and regulations, polyurethane foam cannot ship into the state of California.

One 10.5-ounce tube installs approximately 16-24 square feet of Sonex® acoustic foam wall panels and fits into a standard caulking gun.

This adhesive makes installation hassle-free and provides a strong, permanent bond when adhering Sonex® melamine materials to walls or ceilings. Compatible with Sonex® Panels in both polyurethane and melamine foams. Sonex® Acoustic Panel Adhesive provides easy clean-up with water.

Additional Information

Details - Water based

PA-02 is mold and mildew resistant, has zero volatile organic compounds (VOCs), and contributes to LEED EQ Credit 4.1. Shelf life is two years in unopened containers. To ensure the integrity of the adhesive, the work area temperature must be 40°F – 100°F (4°C – 144°C). Protect from freezing.* If frozen, completely thaw prior to use.
Passes 5 freeze-thaw cycles. Working time is 15 – 120 minutes, full cure in 24 – 172 hours depending on the environmental conditions.

On gypsum board or similar non-porous surfaces:

– 24” x 24” (610 x 610 mm) panels will require 0.33 – 0.5 tubes.
– 24” x 48” (610 x 1219 mm) panels will require 0.5 to 0.66 tubes.
– 48” x 48” (1219 x 1219 mm) panels will require 1 – 1.5 tubes.
– 48” x 96” (1219 x 2438 mm) panels will require 2.5 – 3 tubes.

Details - Polyurethane based

PA-04 is mold and mildew resistant, has zero volatile organic compounds (VOCs), and contributes to LEED EQ Credit 4.1. Shelf life is two years in unopened containers. To ensure the integrity of the adhesive, the work area temperature must be -40°F – 250°F (-40°C – 121°C).* Although the bond will be immediate, please allow 24 – 72 hours for full cure, depending on the environmental conditions.

On gypsum, flat metal or similar non-porous surfaces:

– 24” x 24” (610 x 610 mm) panels will require 0.33 – 0.5 tubes.
– 24” x 48” (610 x 1219 mm) panels will require 0.5 to 0.66 tubes.
– 48” x 48” (1219 x 1219 mm) panels will require 1 – 1.5 tubes.
– 48” x 96” (1219 x 2438 mm) panels will require 2.5 – 3 tubes.

On corrugated metal decks or similar nonporous surfaces:

– 24” x 24” (610 x 610 mm) panels will require 1.5 tubes.
– 24” x 48” (610 x 1219 mm) panels will require 0.75 tubes.
– 48” x 48” (1219 x 1219 mm) panels will require 1.5 tubes.
– 48” x 96” (1219 x 2438 mm) will require 3 tubes.

General Installation Notes

• Make certain that substrate surfaces to which panels will be applied are smooth, clean and level; free of dust, dirt and other residues or contaminants that could inhibit a strong bond to develop.
• Cut adhesive tube tips to produce a bead flow of ¼ inch (6.4 mm) diameter.
• Run a continuous bead of adhesive around the panel’s perimeter, approximately 1.5 inch (38 mm) from edges; then apply intermittent beads from opposite corners through the center of the panel creating an X.
• Press panels firmly into place and smooth evenly across them to ensure a strong, lasting bond; adhesive tack should be immediate.

SKU: N/A Category: Tags: , , , ,
Updating…
  • No products in the cart.